Factory Customizes 250cc High quality Powerful Gasoline Motorcycle

ADV

Product parameters Recommended Models Store

Factory Customizes 250cc High quality Powerful Gasoline Motorcycle Featured Image

Product parameters

Engine type	165FMM
Dispacement(CC)	223cc
Compression ratio	9.2:1
Max. power(kw/rpm)	11.5kW/7500rpm
Max. torque(N.m/rpm)	17.0Nm/5500rpm
Outline size(mm)	20507101060
Wheel base(mm)	1415
Gross weight(kg)	138kg
Brake type	Front disc brake (manual)/rear disc brake (foot brake)
Front tire	110/70-17
Rear tire	140/70-17
Fuel tank capacity(L)	17L
Fuel mode
Maxtor speed(km/h)	110km/h
Battery	12V7AH
Loading Quantity	72

Product Description

The following is the introduction of 250cc motorcycle export products:
1. Engine: A 250cc motorcycle is usually equipped with a single-cylinder four-stroke gasoline engine, which can output about 20-30 horsepower and meet local emission standards, such as EPA emission standards in the United States.

2. Frame and braking system: The motorcycle frame is usually made of steel pipe or aluminum alloy, which can provide sufficient strength and stability. The braking system includes front and rear disc brakes and hydraulic brakes to ensure safe driving.

3. Suspension system: The suspension system includes front and rear shock absorbers and support non-independent suspension to provide sufficient support and shock absorption effect to improve driving experience and stability.

Product Description

Exporting motorcycles abroad,our motorcycle have the following characteristics:
1. Comply with local standards: Exported motorcycles need to comply with local laws, regulations and technical standards, such as CE certification standards of the European Union, EPA emission standards of the United States, etc.

2. Drivability: Motorcycles for export need to have reliable driving performance, including considerations of driving stability, power output, and fuel economy in the local environment.

3. Factory quality inspection: Exported motorcycles need to undergo strict factory quality inspection to ensure that the quality of the vehicle meets the standards and avoid complaints or recalls caused by quality problems.

4. Transportation and customs clearance: motorcycle export requires transportation and customs clearance procedures, including packing, shipment, transportation insurance, customs declaration and other processes, and factors such as customs clearance time and cost need to be considered.

5. Market demand: Before exporting motorcycles, it is necessary to fully research and understand the needs and trends of the target market in order to effectively sell products. Hope the above information can help you understand some characteristics of motorcycle export.

Package

packing (2)

packing (3)

packing (4)

Picture of product loading

zhuang (1)

zhuang (2)

zhuang (3)

zhuang (4)

RFQ

1. What equipment do I need to wear to ride a motorcycle?

Answer: To ride a motorcycle, you need to wear a safety helmet, riding gloves, riding boots and riding clothing, and you must wear the prescribed formal safety equipment before you can go out.

2. What are the key points of motorcycle maintenance?

Answer: Motorcycle maintenance is very important. It is necessary to replace the engine oil, lubricant, fuel filter element, etc. regularly, remove excess water and impurities, remove the air filter and replace the filter element.

3. How to check the tires and brake system of motorcycles?

Answer: Check the motorcycle tires, mainly to observe whether the tires are worn and the air pressure is normal; check the brake system, mainly to observe whether the brake pads and brake oil are fully charged. Hope my answer can help you.